The new 2nd generation SpeedCove Systems are made from an exclusive lightweight flexible polymer composite. They are moisture proof, insect proof, and once installed, can withstand extreme heat and cold temperatures without warping, cracking or deteriorating. All pieces come in a medium cream color, and have a very fine 220 grit finish on the face to increase adhesion of coatings. All pieces have a ¼" relief cut in the lower back corner so they can fit snug to the wall & floor in unsquare corners; this significantly reduces the need for excess grinding & prep work. The QuickSeal Edge© at the bottom "foot" area is angled down to touch the floor first, transition smoothly, form a positive seal, and eliminate most patching. It also adjusts slightly for uneven floors.

 

1", 4", 6" & 8" Radius Cove Base

• Actual height: 4", 6" & 8"
• Cove radius: 1"+
• Base portion thickness: ¼"
• Length: 48"
• Total distance out from wall: 1 ¼"

 

 

4", 6" & 8" Radius Cove Base Corners

• Actual height: 4", 6" & 8"
* Cove radius: 1"+
* Base portion thickness: ¼"
* Length: 10" ( 5" down each side of wall )
* Total distance out from wall: 1 ¼"

 

 

 

1" Radius Cove

* Actual height: 1"
* Cove radius: 1"+
* Corner portion thickness: approx. 5/16"
* Length: 48"
* Total distance out from wall: 1"

 

 

 

 

 

4", 6" & 8" Radius Cove Base Bull Nose Corners (outside 90's)

* Actual height: 4", 6" & 8"
* Cove radius: 1"+
* Base portion thickness: ¼"
* Length: 10" ( 5" down each side of wall )
* Total distance out from wall: 1 ¼"
* Bull Nose radius: fits 3/4" to 1" radius rounded walls