SPEEDCOVE NOW UNDER NEW NATIONWIDE DISTRIBUTION - - - As of Nov. 2007, Solid Rock Enterprises, the original creators, manufactures, and suppliers of the New 2nd Generation SpeedCove Systems, is now the exclusive nationwide & international suppliers to their growing network of distributors. For sales, technical support, and samples call us at 530-344-9000 (Crown Polymers is no longer a distributor of SpeedCove).

SpeedCove Systems Awarded in 2006 & 2007 - The new & improved SpeedCove Systems are revolutionizing the industry by improving the speed... more

Additional sizes & Shapes proposed for 2008 - We are planning to offer our 1" radius cove only in 48" long pieces for all types of applications. ... more

The word is getting out… - SpeedCove Systems were debuted at WOC 2006, and can be seen in Coatings Pro Magazine & Source Book, Concrete Décor, Hanley Wood's CMCP, Jobsite Magazine's concrete surface publication & more.



» Archive...

news
2nd GENERATION SPEEDCOVE IS LIGHTWEIGHT • FLEXIBLE • IMPACT RESISTANT • FASTER THAN EVER
pic
» Our new & improved 2nd Generation SpeedCove is made from
an exclusive lightweight, flexible polymer composite
» 3x faster to install; 3x lighter to ship & handle, & virtually unbreakable
» It's used with all types of finishes & applications: epoxy, decorative, and build-up
» For commercial, industrial, residential, institutional, new & restoration projects
» Meets & exceeds Environmental Health Department code requirements
» Installed in facilities for the US Forest Service, FDA, US Government & Military
» Comes in 4", 6" & 8" tall straight 48" pieces w/ matching inside & outside 90º corners
» Installs using basic carpentry tools & skills
» Under cabinet toe kicks & around curved walls are no problem
» Can be tacked in place w/ finish nailer until bonding agent cures
» Overnight & rush jobs are able to be completed much faster.......
» More Advantages
title
pic
PRODUCTS & SPECIFICATIONS
Engineered for speed and perfection

SpeedCove Systems are pre-formed cove base moldings made specifically for use with high performance commercial, industrial, and residential floor coatings. SpeedCove Systems quickly & easily form the correct shape & height around the perimeter of a room to meet the Environmental Heath Department's sanitary requirements. When this cove base and floor area is coated over it provides a uniform, smooth, seamless, and integral floor-to-wall juncture that produces the most sanitary and easily maintained floors available.

FEATURES & BENEFITS
» Consistent, uniform 1" cove radius makes finished floors look absolutely
beautiful, and easy to clean
» Streamline top edge eliminates a "dirt shelf" (and works with all applications)
» QuickSeal Edge™ bottom is angled down to transition smoothly, form a positive
seal, & eliminate most patching… Also adjusts slightly for uneven floors
» The polymer composite provides a "monolithic" integration w/ (between) the
cove base & floor coatings
» Creates a seamless, water & chemical proof connection between floors & walls
» Meets highest code standards for both foreign & domestic
» 10" long pre-formed 90o corners eliminate slow & inconsistent manual work, plus
joint patching is done out in the flat section for speed & ease
» Flexible polymer composite allows cove base to flex around general bends in wall
& floor, while bridging over smaller imperfections
» Base portion is ¼" thick so it installs flush with tile and FRP channel/termination
strips
» Additional 1/4" relief cut in back/bottom allows pieces to sit tight even in an
unsquare corner, and reducing the need for excessive grinding/prep work

» Product Specs & Features

title
pic

Installation requires basic carpentry and tile setting tools and skills. All pieces are adhered together, to the wall, and the floor with a full-spread of adhesive. The joints are covered with joint & crack patching compounds. The top transition is sealed to the wall and then coatings can be applied.


» Installation Instructions

  header
 
 

 

Home

Job Photos

Products & Specs

Advantages

Installation

Jobs Completed

Distributors

Engineers & Architects

Contact Us

Links

 

 

 

 

  title

 

 

 

title

pic

pic

pic

pic

 

Updated 1/3/09

Visual Image Productions

© Solid Rock Enterprises™ 2006